|
 |
|
  |
  FIB Camber STUB designed for CFS.  CFS-STUB designed for HATA holder users. CFS-STUB designed for FIB Chamber with easy to use sample clamping system.
After checking your sample in TEM, and wish to get it back into the FIB chamber again. With this solution you get the sample back in the same position. Repeat again and again until desired result is achieved. I you have SEM/FIB Dual Beam type FIB , You are able to milling to the
both side your Specimen wth SEM viewing. Item name: CFS-STUB for WD=5 Type Load-Lock. We are able to insert the stage of FIB Chamber via the side entry Load-Lock
System. This is low profile designed for shot working distance Objuctive Lens
to work hight. Left photograph view: that is of setting on the Load-Lock. |
 |
|
  |
FIB Camber STUB designed for CFS. CFS-STUB designed for HATA holder users. CFS-STUB designed for FIB Chamber with easy to use sample clamping system.
After checking your sample in TEM, and wish to get it back into the FIB chamber again. With this solution you get the sample back in the same position. Repeat again and again until desired result is achieved. I you have SEM/FIB Dual Beam type FIB , You are able to milling to the
both side your Specimen wth SEM viewing. Item name: CFS-STUB for WD=13 Type A Item name: CFS-STUB for WD=13 Type B ( for BULK speciment CFS) We are able to set CFS to 90 degree to the horizon of the chamber stage.
Item name: CFS-STUB-STAND-D60 for CFS-STUB for WD=13 Type A and B We are able to set CFS to 60 degree to the horizon of the chamber stage.
Good know how! That becomes advantageous to process both sides for specimen by arranging CFS to 60 degrees. |
 |
|
 |
 Item number: 911 0624 8031 Item name: CFS-ST-FIB-EDS. This CFS is able to transport into the FIB and transport to the cut out specimen by pick up probe in the FIB column. This CFS is able to transport into the FIB column with bulk specimen. Applicable instrument: FEI Tecnai (G2), TITAN Super Twin sires. This CFS is option for HATA-8075-ST. |
|